Top 10 breadboard kit 2022

1. DEYUE 3 Set Standard Jumper Wires Plus 3 Set of Solderless Prototype Breadboard 830 tie Points Breadboard | 3 Set of M/F, M/M, F/F – Each 40pin Electronic Jumpers Wire

  • 100 % SATISFACTION GUARANTED ★ Make YOUR bread boarding easy with the great end terminals to stick into the consistent holes alignment breadboard points with different color for convenience and variety of lengths to support your needs
  • NO WORRIES ABOUT ANY WIRE FAILIER ★ With firm plastic hosing on the terminal ends and 10 woven copper cables as one, YOU should never be worried about any frailer to be debugged PIN HOLES ARE EXQUISITELY LINING UP ;
  • PERFECT MATCH OF FEMALE MALE CONNECTORES ★ With the high friction to hold the male ends tightly; Adequate pin ends length; They fit excellently into the breadboard.
  • TIME SAVING KIT OF JUMPER WIRES AND BREADBOAR ★ DIY with Arduino based; Raspberry Pi 2, 3; Many different sizes; No twist or deformation on the U-Shape Jumpers; With subdivided case, Without any intermittent connections; Holes are properly cut out;
  • ACKAGE COMPONENT ★ 3 X 830 tie-points (6.5 x 2.2 x 0.4″ ); 3 x 40pin breadboard jumper wires in one set F2F, F2M, M2M pin, for your prototyping pleasure

2. REXQualis Electronics Basic Kit w/Power Supply Module, Breadboard, Jumper Wire, LED,Resistor, comes with more than 300pcs sensors and components for fun and simple electronic projects.

  • Highest Cost Components Kit: It comes with more than 300pcs sensors and components for fun and simple electronic projects.
  • Safe and Secure Pakcage: Resistors/LED/Transistors and Integrated Circuits are individually packaged and labeled, and well-stored in a sturdy box
  • The Breadboard Power Supply come with a USB Power Cables,which is hard to find.
  • Datasheet is available to download from our official website or you can contact our customer service.
  • Not including the controller board.

3. Smraza Basic Starter Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, Compatible with Arduino R3, Mega2560, Nano, Raspberry Pi

  • Smraza Electronics Fun Kit – It has all consumable component are often used. Compatible with Arduino and Raspberry Pi, it can almost meet all your needs. Not included controller board.
  • A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
  • With jumper wire and Male-female dupont wire to meet your project expetation.
  • All parts components are in a sturdy and nice storage box which can help you keep the components neat after using.
  • With Datasheet and Tutorial – We provide detailed instruction for you to begin your electronic projects, any questions, please contact our customer service.

4. WayinTop Electronics Component Fun Kit w/E-Book, Upgraded Electronic Starter Kit with Breadboard Jumper Wires Kit, PCB Soldering Kit, LEDs & Resisitor Kit for Arduino/for Raspberry pi/ESP32/ESP8266

  • 【The Most Complete Electronic Starter Kit】The components of our starter kit are the most complete combination of Open-Source Electronics, which can support most DIY electronic projects such as for arduino, for raspberry pi, for ESP32, for ESP8266 and so on. Very easy to get started!
  • 【Born for Electronics Enthusiasts】This kit is specifically designed for entry-level DIY electronics enthusiasts. Through the kit, you can learn electronic components, program design, circuit design, PCB soldering, electronic project etc.
  • 【Meet Your Various Needs】This kit includes breadboard, power supply, PCB board, and various circuit cables to meet the needs of electronic circuit learning and circuit board design.
  • 【High Quality & Reusable】The electronic components are made of high quality and reusable. The quantity of our various models is enough for your use. After learning, you can directly use these electronic components to make DIY projects.

5. AUSTOR 560 Pieces Jumper Wire Kit 14 Lengths Assorted Preformed Breadboard Jumper Wire with Free Box

  • Parameters: U shape, 24 AWG, male to male, wire length 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm
  • Wide applications: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects
  • Easy to use: all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard
  • Extra bonus: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch
  • Note: the breadboard wire is a little soft so that convenient for changing its shape to do connect test; if you find that it can’t be inserted, please check whether the cable in the pin hole of the breadboard is in good condition or not

6. ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi

  • This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers
  • With more than 200Pcs components
  • With a precision potentiometer, better quality, power supply module and breadboard
  • With jumper wire and f-m DuPont wire
  • Not including the controller board

7. 4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks

  • 400 point and 830 point breadboards are available to meet your various experimental needs.
  • White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.
  • With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield.
  • Inter Connect Any Components with 20-29 Awg (0.3-0.8mm) Wire.
  • Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.

8. REXQualis Electronics Component Fun Kit w/Power Supply Module, Jumper Wire, 830 tie-Points Breadboard, Precision Potentiometer,Resistor Compatible with Arduino, Raspberry Pi, STM32

  • Highest Cost Components Kit: It comes with more than 400pcs sensors and components for fun and simple electronic projects.
  • Safe and Secure Pakcage: Resistors/LED/Transistors and Integrated Circuits are individually packaged and labeled, and well-stored in a sturdy box
  • The Breadboard Power Supply come with a USB Power Cables,which is hard to find.
  • Datasheet and Tutorial are available to download from our official website or you can contact our customer service.
  • Not including the controller board.

9. ELEGOO 3pcs Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks

  • 630 tie-point IC-circuit area plus 2×100 tie-point distribution strips providing 4 power rails.
  • White PP plastic body with black printed legend. Color legend on distribution strips.
  • With self-adhesive tape on the back, make it easy to stick on the Prototype Shield.
  • Packing in a paper box.
  • We have always cared about the customer experience and improve the product function details.

10. SunFounder Electronics Fun Kit with 1602 LCD Module, breadboard, LED, Resistor Compatible with Arduino UNO R3 MEGA2560 Raspberry Pi 400 4B 3B 3B+ 2B 2B+

  • Electronic Starter Kit – Our electronic kit has more than 300pcs components you need for getting started into programming compatible with Arduino and Raspberry pi .
  • Highest Cost Components Kit – Package includes 400 point breadboard,1602 LCD display, servo motors, jumper wires, Dupont wires, color LCD and resistors, capicitors, relay, usb cable, buzzers and etc.
  • 21 Lessons Provided – An upgraded electronic fun kit has more than 20 interesting lessons which will give you a dynamic and creative learning experience.
  • Professional Tutorial Provided -We have prepared many interesting and practical examples online for you to learn to code and program faster and easier.
  • Excellent package – A campact and pretty storage container for you to store all the components kit without losing.

GET THE BEST DEALS IN YOUR INBOX

Don't worry we don't spam

GoodsBuddy
Logo