Top 10 contractor saw 2022

1. DCT Heavy-Duty Retractable Workbench Contractor Saw Swivel Caster Wheels Assembly Set with Mounting Plate Bracket 4-Pack

  • MOBILE WORKBENCH: Designed to maintain original stand height, the DCT Heavy-Duty Retractable Workbench Contractor Saw Swivel Caster Wheels Assembly Set with Mounting Plate Bracket 4-Pack is the solution for easily positioning your heavy workbenches, stands, and open-base saws to any area in your shop; 360-degree freely pivoting casters with a simple, innovative, and secure foot pedal mechanism gives you hassle-free mobility to optimize your woodworking options
  • USE VARIOUS STANDS: Steel assembly can move up to 600 pounds (272kg) total; Fits 2-inch (5.1cm) diameter or larger workbench legs that are slanted or tapered at a 12.5-degree angle; Not compatible with vertical (right angle) legs (if mounted vertically, casters will not swivel and will drag); Entire assembly is 9 inches (22.9cm) tall (8-inch / 20.3cm bracket, 1-inch / 2.5cm); Castor lever extends 5 inches (12.7cm) in wheel-up position; Each hard rubber caster has a 2.5-inch (6.4cm) diameter
  • SAFE WORK ENVIRONMENT: Unlike mobile bases, these castors do not sway; Workbench is not resting on the wheels when they are in the upward position (weight is on the leg itself for a stable work environment); If you wish to move your heavy bench, push foot lever down and the bench is moveable (release foot lever upwards and bench is stable)
  • SIMPLE INSTALLATION: Mounting hardware and instructions included; Some saws may require drilling for mounting hardware; 6.6-inch (16.8cm) distance between holes; If mounted so bottom of bracket is even with bottom of leg, there is 1-inch (2.5cm) clearance from floor to bottom of table leg when caster is down; Push pedal down to elevate workbench, move to preferred location, then lift pedal to lower table firmly back onto floor; When castors are retracted, your saw sits solidly on its own legs
  • CONTENTS: Package includes (4) caster wheels with (4) lift brackets attached, (16) nuts, (16) bolts, (32) washers; Instructional diagram included for your convenience

2. Milescraft 1500 DustCutter – Contractor Saw Dust Collection System , Black

  • Quick and easy installation
  • Never needs removing to empty
  • Fits many different table saws (having base dimensions up to 20″ wide and 17″ deep)
  • Optional and easy vacuum connection
  • Comes in 3 modes: collector, funnel and vacuum

3. Craftsman 10″ Contractor Table Saw Metal Handwheel Handle Crank 1/2″ Tilt or Elevation Shaft

  • 4 1/2″ diameter handwheel, fits 1/2″ shaft. Used on the blade elevation and tilt shafts.
  • Fits Craftsman 113.xxxxxx model series belt drive contractor saws with 1/2″ diameter shafts.
  • Replaces Sears Part Numbers: 818526, 62689, 820452, & 806872
  • Will not fit older model 113.xxxxxxx saws that have 3/8″ diameter shafts.

4. Contractor Table Saw Dust Bag

  • (1) Contractor Table Saw Dust Bag
  • (12) Screw Snaps
  • (1) Set of Instructions

5. Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown.
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade.
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert.
  • Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can also use zero clearance inserts with dado blade sets. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades.
  • This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert features two Snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!

6. Rock Paper Scissors Table Saw – Funny Carpenter Contractor T-Shirt

  • Looking for Handyman gifts for men, Woodworking gifts for men or simply a power tool shirt? Here’s a funny table saw shirt; rock paper scissors table saw – for all those looking for a handyman shirt, plumber shirt, woodworker shirt or a carpenter shirt.
  • DIY enthusiast weekend warrior or professional, anyone working with power drills, impact drivers, table saws, circular saws, orbital sanders or any other power tool will immediately recognize and love this funny tool brand shirt.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem

7. DELTA 34-154 Standard Table Insert for Right Tilt UniSaws and Contractors Saws

  • Standard table insert for table saws
  • Country Of Origin: China
  • Model Number: 34-154
  • Item Package Dimension: 17.5″ L x 4.0″ W x 0.5″ H

8. LENOX Tools Hole Saw Kit, Speed Slot, 26-Piece (308042000G)

  • 2X DURABILITY AND LONGER LIFE: 2X more durable with 50% longer life than previous LENOX hole saws
  • HOLE SAW SIZES: Includes the most commonly used hole saw sizes
  • INCREASED WALL THICKNESS BENEFITS: Increased wall thickness improves durability and minimizes tooth loss
  • TOOTH DESIGN PENETRATES EASILY: Optimized tooth design penetrates metal with ease
  • EASY PLUG EJECTION: Larger, sharper teeth for faster cutting and SPEED SLOT staircase design for easy plug ejection
  • EASY PLUG REMOVAL: Speed Slot features a staircase design for easy plug removal
  • 2X BLADE LIFE: Up to 2X the life in metal cutting

9. SKIL 3601-02 Flooring Saw with 36T Contractor Blade, Red and black

  • Cuts solid, engineered and laminate flooring with ease
  • Makes cross, miter and rip cuts
  • Lightweight design for transport and use at any project location
  • Miter detents at 0, 22.5 and 45 degrees
  • Die-cast aluminum miter and rip fence

10. Craftsman Belt Drive Contractor Table Saw 2 1/2″ Pulley Set with Keys for 5/8″ Arbor or Pulley Shaft

  • Sears Craftsman Belt Drive Table Saw Arbor or Motor Pulley Set with Keys.
  • 2 1/2″ diameter pulleys fit a 5/8″ keyed shaft.
  • A 3/16″ square key and a 3/16″ woodruff key is included.

GET THE BEST DEALS IN YOUR INBOX

Don't worry we don't spam

GoodsBuddy
Logo