Top 10 Best dj crossover 2022

1. Mr. Dj PRO-SUB15AMP 15-Inch 5400W Maximum Peak Power Self-Powered Subwoofer with Crossover

  • 15″ woofer with 3″ Voice Coil
  • XLR & 6.35mm Jack Input
  • Balanced XLR inputs (stereo) with loop through to top speakers or use the simple 1/4 inch speaker level mono input and Speakon Output

2. MUSYSIC MU-CO4W PROFESSIONAL 2/3/4-WAY AUDIO STEREO SOUND PROCESSING CROSSOVER

  • Crossover Range: Subwoofer: 50-250 Hz; Low/High: 70-1000 Hz; Mid/High: 480-7000 Hz
  • Frequency Response: 20Hz-25kHz (1dB) / Low Cut Filters: 30Hz / -3dB, 12dB/Octave / Signal-to-Noise Ratio: 80dB
  • Total Harmonic Distortion: <0.05% / Input Impedance: 100k Ohms / Output Impedance: 220 Ohms
  • Unbalanced XLR 1/4″ input jacks / Balanced XLR, 1/4″ outputs
  • 19″ Rack Mount

3. Replacement Speaker Crossover 2000 Watts WORKS FOR JBL, Peavey, Cerwin Vega, Pyle-Pro, Mr.DJ, MANY BRANDS! EMB CX-21 High and Low Frequency Response the most technologically up-to-date

  • High and Low Frequency Response
  • 2-Way Crossover
  • Max Power: 2000W
  • Frequency Crossover: 3.5kHz
  • the most technologically up-to-date products on the market.

4. Requiem For My Rave: The Story of Anabolic Frolic, Happy Hardcore, and Hullabaloo!

5. Polk Audio PSW10 10″ Powered Subwoofer – Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black

  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!

6. Cross Over

7. Rockville PPA20 Preamp Professional 1U Rack Mount Pre-Amplifier w/Crossover+EQ, Black

  • Rockville PPA20 Rack Mount Pre-Amplifier. 1U Rack Size. 1/4″ microphone input. RCA PHONO / AUX1 / AUX2 / AUX3 / AUX4 / AUX5 inputs. 1/4″ headphone output. RCA REC / LINE outputs. XLR master output ( left, right ). Headphone volume & Microphone volume controls. 3 band EQ (Treble / Mid / Bass). Master volume. L / R balance. Input source switch. Mono / Stereo switch. Mute
  • Low Cut Switch allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer. Treble / Bass control. Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response. Tape Monitor . Ground lift switch
  • Unit dimensions: 18.89” x 6.49” x 1.73” inches. Unit weight: 4.43 lbs. Shipping dimensions: 20.47” x 8.46” x 4.33” inches. Shipping weight: 5.73 lbs
  • Inputs Sensitivity/Impedance. Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Tape, Tuner, CD, Aux: 150mV / 22 Kohms. Output/Impedance. Tape Rec: 150mV / 3 Kohms. Pre Output: max. 11V / 1 Kohms. Total Harmonic Distortation. Mic: less than 0.02%. Phono: less than 0.04%. Tape, Tuner, CD, Aux: less than 0.01%. Signal To Noise Ration. Mic: more than 70 dB. Phono: more than 90 dB. Tape, Tuner, CD, Aux: more than 100 dB
  • Frequency Response: 5Hz . 30kHz +0, -3 dB. Bass: 12dB at 100Hz. Midrange: 9dB at 1 Hz. Treble: 12dB at 10kHz. Loudness: 9/0/+9dB at 100/1k/10kHz. Mute: 20dB. Power Consumption: 15W

8. EMB CX-31 Replacement Speaker Crossover 2500 Watts Works for JBL, Peavey, Cerwin Vega, Pyle-Pro, Mr.DJ, Many Brands! High and Low Frequency Response

  • Frequency Crossover: 3.5kHz
  • Max Power: 2000 Watts / 3 Channels
  • Technical Details: 2-Way Crossover
  • High and Low Frequency Response
  • Perfect frequency distribution – our crossovers

9. Seismic Audio – Pair of 15″ PA DJ Speakers 700 Watts PRO Audio – Mains, Monitors, Bands, Karaoke, Churches, Weddings

  • Woofer – 15″ 2 way w/ 50oz magnet & a 2.5″ kapton voice coil.  350 Watts RMS – 700 Peak
  • 8 ohms 45Hz –20KHz Sensitivity: 96 db Tweeter: 1.5″ Titanium driver 10z. magnet & 1″ throat
  • Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
  • 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
  • Input terminal has two 1/4″ & two Speakon inputs. 1.5″ stand mount. 29″ T – 19″ W – 15″ D

10. Remember When (In Death)

GET THE BEST DEALS IN YOUR INBOX

Don't worry we don't spam

GoodsBuddy
Logo